Last Updated on September 20, 2022
Learn How to Save Money on Water Bills
If you are wondering how to save money on your water bill, you’re not the only one. Saving money on bills can become a priority when you’re on a limited budget with your work or have a savings goal. Whether you want to put aside money for a down payment or a savings account, or you’re tired of paying hefty bills, this guide will help. Learn how to save money on water bills.
How to Save Money on Water Bills by Using Less Water
There are different ways to save money on water bills, but in the end, it all comes down to reducing your water consumption. Water is a must, but you decide how much you want to use and when.
Adjusting to lower consumption might be easier than you think. It is all a matter of mindset and habit. Do you usually keep the water running while brushing your teeth? That is one water-consuming habit you might want to change.
How can you save money on water bills fast and smoothly?
- Set a savings goal (e.g., paying 3% less on water bills).
- Track your water consumption habits.
- Eliminate or reduce the habits that cause water waste.
It might take time to determine which habits waste the most water. Be patient and pay attention to how much water you use throughout the day. Start thinking about your water-related needs from morning to evening. Analyze the steps you take when:
- Brushing your teeth or washing your face in the morning.
- Cleaning dishes after each meal.
- Showering in the evening.
- Cleaning your home on weekends.
If you keep the water running for long periods of time while doing all these, you’ve spotted bad habits. You need to shower daily, but you don’t have to do it for 20 minutes. You must wash your dishes, but you can turn the water off while cleaning them with a sponge and use it in moderation to rinse them.
You need to flush the toilet after each use. This takes around 2.37 gallons (9 liters) of water per flush. Start to look at ways to reduce your consumption. For example, a dual flush toilet could be an alternative.
The bottom line is you should reduce your water consumption by changing your habits. Start with a few simple changes:
- Turn the water off when you soap your hands, brush your teeth, or shave.
- Use cold water while washing clothes. That can also decrease your electricity bill.
- Take shorter showers and turn off the water when you soap.
- Only wash full loads of clothes and dishes.
Dual flush system advantages
If you live with your family, there’s a lot of water going down the drain just by flushing the toilet. With it goes part of the money you spend on water bills. One way to reduce water consumption is to limit the amount you use each time you flush. To do this, you might want to try dual toilet flush systems. These are relatively new systems that aim to reduce water consumption by decreasing the amount of water per flush.
They have two options – the partial and the full flush. A dual system provides two buttons or handles for each type of flush. The partial flush uses less water – around 1 gallon per flush. It is designed for liquid waste. The full or regular flush uses more water – about 1.6 gallons. That type of flush is designed for solid waste. Both flushing systems are efficient and help save water.
If you live with one more person, you probably flush the toilet around ten times per day. Let’s see how this translates into water consumption.
With a regular flush system, you consume 23 gallons of water per day if you flush the toilet 10 times a day, which means 161 gallons per week. With a dual system, you consume 5 gallons per day if you use the partial flush 5 times and 8 gallons with the dual flush if you use this one five times too. In total, it means 91 gallons per week, 70 gallons less compared to the regular flush.
Regular flush system | Dual flush system | ||
Water consumption per day: | 2.3 gallons x 10 = 23 gallons | Water consumption per day (50% full / 50% partial flushes): | 8 + 5 = 13 gallons |
Consumption per week | 161 gallons | Consumption per week | 91 gallons |
Number of gallons saved per week: 70 | |||
Number of gallons saved per month: 280 |
A dual flush can help you use 70 gallons of water less per week. At the end of the month, that means approximately 280 gallons of water you won’t add to your bill.
Water Consumption in Numbers
The average US household uses around 300 gallons of water every day. If we turn to individual consumption, the average person uses approximately 80-100 gallons of water daily. In this context, it’s worth trying to reduce water consumption for environmental and financial reasons.
Currently, the average monthly water bill Americans pay is $70.93. Reducing your consumption by even as little as 10% can make a difference at the end of the year.
Monthly average water bill cost | $70 |
Reducing consumption by 10% | = -$7 per month |
Amount saved in one year | = $84 |
Amount saved in five years | = $420 |
Let’s imagine you live in Connecticut and pay an average of $100 for your monthly water bill. In a month, you can save $10 by wasting 10% less water. That can amount to savings of $600 in five years.
How do you achieve these cost savings? By applying some of the tips mentioned above and generally trying to use less water with every bath, shower, and dishwashing session.
Understanding Your Water Bill Price
How much you pay for water depends on your location. Utility bill prices vary on a state-by-state basis. For example, Alaska has the highest average monthly cost – $496. The state with the lowest utility bill cost is New Mexico, which averages $232 per month. The state with the highest water price is West Virginia ($72).
According to World Population Review, the lowest water prices are in Florida ($6) and Wisconsin ($18). You can adjust your consumption habits to spend less. The water company you choose as your supplier can also make a difference. Switching your water provider might not be something you’ve considered before.
You’ve probably used the same water provider for years. Yet, there could be better options for your pocket.
Generally, utility companies charge their clients monthly based on their water use. That is why reducing your consumption should help you save money. There are several options for how companies determine the cost of water bills. Understanding the difference between them can help you make a good decision when choosing your water provider.
For example, some people might have high water needs in the summer, which might not make seasonal rates the best solution. Others can benefit from declining block rates if they have high water consumption all year round. Here is a quick breakdown of utility companies’ main types of rates.
The flat rate
This type of rate is not variable. It’s like a subscription service where you pay the same fee monthly. Regardless of how much water you use, you will pay the same.
These companies are rare because operating on this basis is not profitable. Besides, this rate doesn’t encourage customers to waste less water, so it’s not an approach that benefits the environment.
Flat rates are another way utility companies measure and price water. This type of rate involves a fixed price per gallon, which means your cost rises with your water consumption.
The uniform rate
Uniform rates are also available and entail a constant per water unit. The bills are calculated for all the metered units a household consumes yearly. Companies relying on this system require customers to use a metered service.
A water meter is a device that measures the amount of water a property uses. Each time you turn the faucet on, the meter starts counting how many gallons of water you use.
The declining block rate
Declining block rates are another pricing model that involves unit blocks. These are volumetric charges, which means the price is set per unit, for example, per cubic meter of water. These are priced in decreasing order. The price per block decreases as consumption increases. This system benefits consumers with considerable water needs, such as farmers.
The increasing block rate
In the opposite corner, there is the increasing block rates system. These rates are also determined based on usage or unit blocks. In their case, the price varies in ascending order. Each block of usage will cost more than the previous one.
This system can promote responsible water usage as higher water consumption leads to increased costs.
The seasonal rate
You can also pay water bills based on seasonal rates. These depend on the period of the year. If you live in the same place for a year, you’ll understand how this system works. Seasonal rates can be used in the warm season, for example. This is when water demand may increase because of higher temperatures and consumer habits such as the need to
- Take showers more frequently
- Wash more clothes
- Water the lawn or engage in gardening
- Use water for swimming pools
Seasonal water rates will make the water bill price increase in this period. It is also a way to encourage moderate water consumption. Things can become more balanced in the second part of the year, especially in winter when the rates decrease.
Understanding how your water bill is calculated can help you better manage your consumption. That knowledge can help you achieve cost savings.